Mount for Marmitek Connect 621 UHD HDMI Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beefy wall/ceiling mount for the Marmitek Connect 621 UHD HDMI Switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mount for the Marmitek Connect 621 UHD HDMI switch.
Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws.
The wall-side is made pretty beefy (18mm thick), but this fits my personal setup with the screws i had, You might make it thinner to make it more stealth.
I've added a slotted vent pattern, to give it some air.
The HDMI switch/box should fit snuggly.
The backside has an opening for all ports being able to be connected. Although, some connectors/cable brands make their connectors more thick then necessary, but i didn't find any of my conenctors having trouble with that.
The slotted vents in the photo's arn't cut all the way trough the front and back, i've made sure in the updated .stl they are now.
Second ever design, please be gentle.
Pictures ripped from my Thingiverse upload, couldn't find the originals, hence why they are blurry.
Printing orientation: standing up on the backside (side where the connecters would go)