1 / 11
Gulikit KingKong 2 Pro Nintendo Switch articulate mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Controller at bottom and Switch on top with articulate arm
- Ocena
- 3 / 5
- Polubienia
- 43
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 1606
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (1)Kolekcje (64)Powiązane
This has 5 parts: the Switch mount, the controller clamp, the arm (the one in photo is the 40mm) and 2 bolts. Mount and clamp need supports, try to not add supports at the clip part of the clamp.
Features:
- High degree of freedom movement from the arm joints
- Easy to take the Switch out
- No other hardware needed
Inspire by: https://www.thingiverse.com/thing:4351778
Thank you for the f3d file from https://www.printables.com/model/415383-gulikit-kingkong-2-pro-controller-phone-holder
Caveat:
- Printing with PETG would be preferred, although I print it using PLA+. 2 places likely to snap if you bend it too far; the front face center button area and the controller charging port area.
- It block the charging light and also the middle 2 button are almost impossible to press, although personally I never use those 2 buttons. The charging port might not be accessible if your cable has a large housing.
Note: STEP files added for you to modified.
Update 2023/07/17: update the Switch mount to remove some slacks