1 / 11
Gulikit KingKong 2 Pro Nintendo Switch articulate mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Controller at bottom and Switch on top with articulate arm
- Rating
- 3 / 5
- Likes
- 43
- Downloads
- 153
- Makes
- 0
- Views
- 1,618
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This has 5 parts: the Switch mount, the controller clamp, the arm (the one in photo is the 40mm) and 2 bolts. Mount and clamp need supports, try to not add supports at the clip part of the clamp.
Features:
- High degree of freedom movement from the arm joints
- Easy to take the Switch out
- No other hardware needed
Inspire by: https://www.thingiverse.com/thing:4351778
Thank you for the f3d file from https://www.printables.com/model/415383-gulikit-kingkong-2-pro-controller-phone-holder
Caveat:
- Printing with PETG would be preferred, although I print it using PLA+. 2 places likely to snap if you bend it too far; the front face center button area and the controller charging port area.
- It block the charging light and also the middle 2 button are almost impossible to press, although personally I never use those 2 buttons. The charging port might not be accessible if your cable has a large housing.
Note: STEP files added for you to modified.
Update 2023/07/17: update the Switch mount to remove some slacks