Caverna Cave Farmers Box Inserts and Tile Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Caverna Cave Farmers Box Insert with frames to hold the supply boards and furnishing tiles.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Caverna Cave Farmers Box Insert with frames to hold the supply boards and furnishing tiles.
The supply board frames are printed in 4 parts each which are then glued together. Each board will clip inside the frame. These were made with pretty tight tolerances and needed no finishing before assembly however I cannot of course guarantee yours will be the same. If you have a big enough print bed the files would be easy to stitch back together to avoid having to glue.
For the supply boards you will need:
Base 1 Left, print 2 of these.
Base 1 right, print 2 of these.
Base 2 left, print 2 of these.
Base 2 right, print 1 of these.
Base 3 right, print 1 of these.
Top 1 left, print 2 of these.
Top 1 right, print 2 of these.
Top 2 left, print 2 of these.
Top 2 right, print 2 of these.
All of the tray parts, print 1 of each.
Trays 1 - 4 for the bottom layer, trays 5 - 8 for the top layer.
Inserts in images printed on BambuLabs x1Carbons. I can't recall the layer height, probably 0.16 but 0.2 would be fine. 15% infill. Small brim. Set detect thin walls if your slicer has any issues.
Enjoy.