Caverna Cave Farmers Box Inserts and Tile Frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Caverna Cave Farmers Box Insert with frames to hold the supply boards and furnishing tiles.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Caverna Cave Farmers Box Insert with frames to hold the supply boards and furnishing tiles.
The supply board frames are printed in 4 parts each which are then glued together. Each board will clip inside the frame. These were made with pretty tight tolerances and needed no finishing before assembly however I cannot of course guarantee yours will be the same. If you have a big enough print bed the files would be easy to stitch back together to avoid having to glue.
For the supply boards you will need:
Base 1 Left, print 2 of these.
Base 1 right, print 2 of these.
Base 2 left, print 2 of these.
Base 2 right, print 1 of these.
Base 3 right, print 1 of these.
Top 1 left, print 2 of these.
Top 1 right, print 2 of these.
Top 2 left, print 2 of these.
Top 2 right, print 2 of these.
All of the tray parts, print 1 of each.
Trays 1 - 4 for the bottom layer, trays 5 - 8 for the top layer.
Inserts in images printed on BambuLabs x1Carbons. I can't recall the layer height, probably 0.16 but 0.2 would be fine. 15% infill. Small brim. Set detect thin walls if your slicer has any issues.
Enjoy.