1 / 4
SCM minimax cu 410c splinter guard (spare part)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SCM minimax cu 410c replacement splinter guard
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
SCM minimax cu 410c splinter guard
You can take a look at the cover picture to see the original and 3D printed part side by side.
Excerpt from the machine manual:
Safety
Be very cautious, when using this 3D printed replacement for the original splinter guard. I cannot guarantee this is safe, as the official SCM recommendation for the original splinter guard is to trim it to desired length (see excerpt from the machine manual - 7.1.3) and I am not sure how PETG behaves, when cut using the circular saw blade. The 3D printed replacement part was not tested yet.
Printing guidelines
- Setup OpenSCAD and export the stl file (optional)
- Install the scad-utils library
- Setup the Lexend Deca font for use with OpenSCAD
- Optionally modify the project
- Export the stl file
- Enable supports (only apply them below the “minimax cu 410c” text part)
- Print in PETG with a minimum 25% gyroid infill (look at the scm-minimax-cu-410c-spare-part-v0-1-1-static.3mf file for a proper setup)