SCM minimax cu 410c splinter guard (spare part)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.98 – €7.30 net (excluding VAT)
For file: scm-minimax-cu-410c-spare-part-v0-1-1_0.15mm_PETG_MK3S_7h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.64 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 7.49 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
SCM minimax cu 410c replacement splinter guard
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v2.0
SCM minimax cu 410c splinter guard
You can take a look at the cover picture to see the original and 3D printed part side by side.
Excerpt from the machine manual:
Safety
Be very cautious, when using this 3D printed replacement for the original splinter guard. I cannot guarantee this is safe, as the official SCM recommendation for the original splinter guard is to trim it to desired length (see excerpt from the machine manual - 7.1.3) and I am not sure how PETG behaves, when cut using the circular saw blade. The 3D printed replacement part was not tested yet.
Printing guidelines
- Setup OpenSCAD and export the stl file (optional)
- Install the scad-utils library
- Setup the Lexend Deca font for use with OpenSCAD
- Optionally modify the project
- Export the stl file
- Enable supports (only apply them below the “minimax cu 410c” text part)
- Print in PETG with a minimum 25% gyroid infill (look at the scm-minimax-cu-410c-spare-part-v0-1-1-static.3mf file for a proper setup)