36 models
SCM minimax cu 410c splinter guard You can take a look at the cover picture to see the original and 3D printed part side by side. Excerpt from the machine manual: Safety Be very cautious, when using this 3D printed replacement for the…
Print approx. €5.98–€7.30 excl. taxPreliminary estimate for PETGSource material: PET
Cover per ld2410c e d1 mini.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
An ESP32-C3 and LD2410C enclosure for your ESPhome presence sensor needs! No hardware is required, and all parts can be printed in any filament you want (except probably carbon-impregnated filament, since that'll mess with your radio…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
Case for HLK-LD2410C mmWave & D1 mini ESP8266 to be added in a room or to be put on a wall. Material used for printing: PETG
I needed a Case for the LD2410C which fits a d1 mini or esp32 d1 mini, so i designed this one.
Ce projet DIY est non seulement accessible et économique (coût total d'environ 7€), mais il est également personnalisable pour s'adapter à divers scénarios de domotique. Que ce soit pour allumer les lumières en fonction de la présence ou…
No supports needed. Model in picture printed on Prusa MINI with PLA.
Human presence sensor housing, could not find any casing for the older ESP 8266, this is my first design so, feedback are welcomed Printed with a 0.2 resolution. Use 4 wall layers if to avoid infills on the lid. Screws needed: 2x 25mm M3…
Radar dish support for HLK-LD2410C motion sensor mmW 24GHz. Printed with 0.4 nozzle, PLA, with organic supports.
In this case fits only a LD2410C, see the pictures. This is meant for bluetooth use case. So if you are integrating this sensor over bluetooth to Home Assistant or any other Home Automation Software, this Case fits perfectly.
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
Yep. It holds an ath20 board, a panasonic PIR, an mmwave radar, and an esp32 of the 38-pin flavor.
I wanted a case for the LD2410C that i could just plug in a 5V PSU and use it over bluetooth The case allow for the sensor to fit with the pins, but i also uploaded a slim version without the pins When inserting the sensor on the top do…
A wall mount radar presence sensor with a LD2410C that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). BOM: D1 mini ESP32 with…
WORK in progress Hello, I designed a Case for the mmWaveRadar-sensor HLK-LD2410C-P from Hilink. It's a first version, more a tryout. The sensor is the version with 2.54mm pinout. It's the “friendly” one. You can better solder it, as the…
Box for ESP32-S2 equipped with an LD2410C sensor. Printed with PLA, at 0.4mm, no supports. DIY Project: https://www.nlion.fr/nicolas-lion-informatique-ancenis/2024/02/25/ld2410c/ Category: DIY
Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 C3 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…
Slight remix of the original model by Prashant Sinha . For instructions please see the original model . The only differences are that this model is adapted to use M2 screws, the original model requires M2.5 which I did not have available.…
Same size as the original, just added a mounting-option and changes vent holes.
Case for ESP32 and LD2410C MMwave sensor. Fits LD2410C and ESP32 with dupont connectors. Use double sided tape or hotglue to mount ESP32. Use M3 25mm for base and lid x2 M3 16mm for arm. x3
Enclosure for a DF Robot Beetle ESP32-C6 and a LD2410C. The enclosure is a tight fit for the C6 but it fits nicely. You may need to push the USBC male connector from the C6 into the enclosure's USB hole from the outside once or twice at…
Most of models I've found assume that there should be some MCU (ESP32 or ESP8266 D1 Mini) used along with it. But as B and C models can use BLE along with Home Assistant. I've decided to place them along my home in that configuration.
Hlubší krabička pro ESP8266 (D1 Mini) se senzorem přítomnosti HLK-LD2410C. Krabička je hluboká pro použití s DUPONT konektory. STL a STEP soubor ke stažení. ---------- Deeper box for ESP8266 (D1 Mini) with HLK-LD2410C presence sensor. The…
Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 S2 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…
Aquara inspired simple case for the ESP32-C3 Super Mini with the LD2410C directly attached as in this model. Use paint on support on the USB-Connect surface and the “lock” surface. The holes can be used to “lock” the lid with filament…
Presence sensor for use in Home Automation Parts used: ESP12E (ESP8266) with breakout board, 26x38mm HLK2410c 24G radar sensor, 22x16mm. BME280 Temp, pressure and humidity sensor, 15x12mm WS2812 LED, x4 pixels, 10x32mm. Notes: All parts…
Caja con alimentación USB directa para ld2410c. Dos tamaños, según interese orientación del sensor. Para conectores use terminales macho y hembra dupont. Puede conectarse directamente a un puerto USB o, como yo, a un switch wifi para…
MMW-1 Human Presence Sensor (Basic Edition) The MMW-1 is a high-performance, compact housing designed for the LD2410C mmWave sensor and ESP32-C3 SuperMini . This design features a technician-grade internal stack and a magnetic mounting…
Thick-USB case: a 12.1 × 6.9 mm pocket in the end wall, so chunky USB-C plugs (up to about 11.5 × 6.3 mm overmold) seat fully. The original slot only fits slim plugs. 16 mm ball back: the original flat back with a 16 mm ball on a…
This model was printed in ABS, but can be printed in any other filament.
lay onto side printed better for me.
