Skådis / Skadis - Tape Measurer (Large)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis mountable (with T-Clip) holder for Tape Measurer.
- Ocena
- 4,875 / 5
- Polubienia
- 63
- Pobrania
- 415
- Wydruki
- 8
- Wyświetlenia
- 1796
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Use with Ikea Skadis system and T-Clips to mount (see remix section).
Fits larger tape measurers (the one I have is 25 feet).
Should fit smaller ones just fine but they will have a lot of wiggle room.
Be sure to print a T-Clip to go along with this model.
After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate clockwise 90° or until the printed model is in the correct orientation. Do not overtighten the model or the T-Clip might bend/break. If so, simply print a replacement T-Clip.
To remove, turn the printed model counterclockwise 90° and pull outward.