Kotto 1/2" ID Hose Outlet Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/2" ID hose outlet fume extractor for Kotto
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
My printer is setup in my office closet which sits right next to the AC unit closet. I needed a way to discreetly exhaust any sort of fumes from the closet into the AC unit closet up and out to the attic. I opted for ½" ID hose as it was the smallest but big enough to still allow some sucking air flow. Air flow did get reduced a little bit vs using no exhaust. If anyone can come up with a better method, like a little bit larger of a hose that's not a 4" exhaust hose please remix! I tried to think of multiple ways to create this with one larger hose, or even 3 larger ones. I may try to flatten out the concave to make it a bit larger to fit a bit larger hoses on it.
Printed with 3 perimeters and 20% infill, screwed directly into the back of the kotto.
Also including a 90 degree attachment so you can bend the hose without kinking it. I made this so I could vent the fumes through the wall and UP instead of straight through the wall.