DJI (Mavic) Mini1/2 Controller Sun Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the design of DonWhitaker I created this sun shade. My goal was to make it fitting more secure on the…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the design of DonWhitaker I created this sun shade. My goal was to make it fitting more secure on the controller, easier to print and fit into the bag that comes with the fly more combo.
Depending on the accuracy of your printer you might need to sand the edges a bit so they fit into the base. You will need 3x Mount Brackets that you glue on the base. To make the shade foldable, I connected them with black structure tape but that is optional.
Looking forward to your makes, likes and feedback on this design.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15
Filament:
Sunlu PLABlack
Category: R/C Vehicles