Stronghero3D and Geeetech ~74-75mm inner diameter spool adapter to 54mm diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronghero3D and Geeetech ~74-75mm inner diameter spool adapter to 54mm diameter
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 157
- Wydruki
- 3
- Wyświetlenia
- 806
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Stronghero3D and Geeetech 74-75 mm inner diameter spool adapter to 54 mm diameter
I was using an existing spool adapter to 8mm rod, but these were too large for my existing adapters. This was a quick model to adapt.
This is to be used in junction with another spool adapter that screws or clamps the spool from both sides. It will squeeze these 2 pieces together.
Printed in PLA 1mm nozzle 0.3 layer height, 10% infill. **probably go with more infill at a smaller nozzle diameter.
**Print quantity is 2.
Found that Geeetech spools were using the same inner diameter. I'll add additional brands as I come across them.