Stronghero3D and Geeetech ~74-75mm inner diameter spool adapter to 54mm diameter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stronghero3D and Geeetech ~74-75mm inner diameter spool adapter to 54mm diameter
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 157
- Makes
- 3
- Views
- 806
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Stronghero3D and Geeetech 74-75 mm inner diameter spool adapter to 54 mm diameter
I was using an existing spool adapter to 8mm rod, but these were too large for my existing adapters. This was a quick model to adapt.
This is to be used in junction with another spool adapter that screws or clamps the spool from both sides. It will squeeze these 2 pieces together.
Printed in PLA 1mm nozzle 0.3 layer height, 10% infill. **probably go with more infill at a smaller nozzle diameter.
**Print quantity is 2.
Found that Geeetech spools were using the same inner diameter. I'll add additional brands as I come across them.