Xacto Knife Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print cover for your Xacto knife which also helps prevent it from rolling away!
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 181
- Wydruki
- 3
- Wyświetlenia
- 751
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So this is pretty straight forward. I suggest printing vertically for best results.
That said, I have noticed that Xacto knife diameters are NOT consistent. I have one which measures 8.25mm at the top edge of the knurled handle and another which measures 8.40mm. The result is if you are looking for a nice snug, yet easy slip on fit you should select the model with a 0.05 to 0.10mm larger diameter than the widest part of the knurled handle. Note that if your printer is over extruding, or not well calibrated you might need to go larger.
I've provided the Fusion360 so it is easy to dial in a custom diameter if necessary