Desk Cable Tidy Section 10cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used several of these to act as cable tidies for my desk. The clip can fit in desks that are 20mm thick.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is a cable tidy that I designed to hide cables along the back of my desk. I designed it with the following specs.
20mm desk thickness my desk was 18mm and I used rubber disks to tighten the grip. I will consider making more native sizes if requested.
The cable clips are 10cm wide and can be placed next to each other if needed and are easy to use.
I have designed the clip to use less support material though you will still need supports as I designed the cable trunk part to have a hook overhang to hold the cables again if requested I will redesign to remove.
I printed this with no issues in PLA and PETG using standard .20 layer heights though you can use quicker settings as the clip is not expected to be stress loading.