spiggytech 3060/3060TI Single Fan Conversion Shroud to Slim 92mm Noctua Fan Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a modification of a single fan 30-series GPU to take 92mm slim fans
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 1862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This project is in alpha testing. As such, it may have goofs and slight fitment gaps. I'm working on that as I acquire another GPU to test the fitting. Your feedback is highly valued in this stage
Update 7/22/2023: Added a new assembly labeled “Classic” that has a patterned face plate design cue. The border is a separate piece to the face plate. But still retains meshed edges. Moving forward, I will also be revising the first “Vision” design as well as working on an integral 95mm and 100mm variety.
Hello!
Enclosed is a modification to the 30-series single fan GPU. It was tested on the following platform: PNY 3060 single fan & PNY 3060 TI with a Manli heatsink
In theory it should fit this type of heatsink.
The front gap is open for a slim 92mm fan for your favorite fan. You may also need a JST PH2.0 plug to convert the fan to PCB
Print in PETG+ or higher temp tolerant material (eg. ASA or ABS)
Vent pieces can be printed at 2 wall perimeter, 0 layer top & bottom, 30% honeycomb for that vent mesh look.