Staples Hyken Neck Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Staples Hyken adapter so that you can increase the height of the head rest.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a Staples Hyken adapter so that you can increase the height of the head rest. I'm 6' tall and the default max height was not enough, resulting in neck cramps.
With this adapter, you can raise or lower it considerably and still use the normal height extension in addition.
You will need 2 M6-1.00x20 screws and 2 M6 Nuts to attach the top portion. You can use something slightly smaller too of course, these don't have to be exact.
The holes are basically self tapping so they're a tight fit, but they work great printing on my Cetus 3D.
I recommend 15+% Infill and/or thick perimeters so it doesn't break. I printed mine with 65% infill
Category: Office