Staples Hyken Neck Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Staples Hyken adapter so that you can increase the height of the head rest.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
This is a Staples Hyken adapter so that you can increase the height of the head rest. I'm 6' tall and the default max height was not enough, resulting in neck cramps.
With this adapter, you can raise or lower it considerably and still use the normal height extension in addition.
You will need 2 M6-1.00x20 screws and 2 M6 Nuts to attach the top portion. You can use something slightly smaller too of course, these don't have to be exact.
The holes are basically self tapping so they're a tight fit, but they work great printing on my Cetus 3D.
I recommend 15+% Infill and/or thick perimeters so it doesn't break. I printed mine with 65% infill
Category: Office