Maglev rotating storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maglev rotating storage. For screws, candies, or something like that.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Maglev rotating storage.
For screws, candies, or something like that.
Max load: 7.5 kg
Instructions for assembly:
Components needed:
1x KR-32-18-04-N (search for this in your browser)
2x KT-08-02-N (search for this in your browser)
4x FE-KT-14-03 (search for this in your browser)
1x outertop
1x outerbottom
1x inner
To the "donut" cutout on the outerbottom put and glue KR-32-18-04-N. On the bottom of the inner are two circular cutouts. Put and glue there the KT-08-02-Ns like that, that they will repel with the KR-32-18-04-N.
On the top of the inner are two circular cutouts too. Put and glue there two of the FE-KT-14-03s.
If you look at the bottom of the outertop, you will see two circular cutouts. Put and glue there the remaining pair of the FE-KT-14-03s like that, that they will attract with the first pair of the FE-KT-14-03s.
Now put the inner to the outerbottom. Cover them with the outertop and glue the outerbottom and the outertop together.
It should levitate on the KR-32-18-04-N.
The Maglev rotating storage has two positions:
Opened, Closed.
If you have any suggestions or problems, let me know in the comments.
Note: I haven't got a 3D printer so I didn't tested it.
Thanks for understanding.
Sry for grammar :)