Maglev rotating storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Maglev rotating storage. For screws, candies, or something like that.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Maglev rotating storage.
For screws, candies, or something like that.
Max load: 7.5 kg
Instructions for assembly:
Components needed:
1x KR-32-18-04-N (search for this in your browser)
2x KT-08-02-N (search for this in your browser)
4x FE-KT-14-03 (search for this in your browser)
1x outertop
1x outerbottom
1x inner
To the "donut" cutout on the outerbottom put and glue KR-32-18-04-N. On the bottom of the inner are two circular cutouts. Put and glue there the KT-08-02-Ns like that, that they will repel with the KR-32-18-04-N.
On the top of the inner are two circular cutouts too. Put and glue there two of the FE-KT-14-03s.
If you look at the bottom of the outertop, you will see two circular cutouts. Put and glue there the remaining pair of the FE-KT-14-03s like that, that they will attract with the first pair of the FE-KT-14-03s.
Now put the inner to the outerbottom. Cover them with the outertop and glue the outerbottom and the outertop together.
It should levitate on the KR-32-18-04-N.
The Maglev rotating storage has two positions:
Opened, Closed.
If you have any suggestions or problems, let me know in the comments.
Note: I haven't got a 3D printer so I didn't tested it.
Thanks for understanding.
Sry for grammar :)