Sony ALC-SH115 Lens Hood for SEL55210 55-210mm F4.5-6.3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of spending 13$ + shipping, I made a 3D model that can be printed with under 35g of filament.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple lens hood made for the Sony 55-210mm F4.5-6.3 lens. Begone lens flare!
For the print I used a 0.4mm nozzle, 0.2mm layer height. I have added supports at the bottom for the bayonet mount and also a brim because this is a moderately big model in the Z axis. Also I have added some text to the outside directly in PrusaSlicer, more on that in this article.
I got the bayonet mount from JohannesBerlin's FE Mount (I have adjusted the inner diameter for the 55-210mm lens). The model is also under the CC BY-NC-SA license because the original model was using this license.
Currently the hood cannot be put backwards towards the camera body; maybe I will make another version with a larger opening in order for it to fit.