Sony ALC-SH115 Lens Hood for SEL55210 55-210mm F4.5-6.3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Instead of spending 13$ + shipping, I made a 3D model that can be printed with under 35g of filament.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 121
- Makes
- 0
- Views
- 694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple lens hood made for the Sony 55-210mm F4.5-6.3 lens. Begone lens flare!
For the print I used a 0.4mm nozzle, 0.2mm layer height. I have added supports at the bottom for the bayonet mount and also a brim because this is a moderately big model in the Z axis. Also I have added some text to the outside directly in PrusaSlicer, more on that in this article.
I got the bayonet mount from JohannesBerlin's FE Mount (I have adjusted the inner diameter for the 55-210mm lens). The model is also under the CC BY-NC-SA license because the original model was using this license.
Currently the hood cannot be put backwards towards the camera body; maybe I will make another version with a larger opening in order for it to fit.