PrintABlok Cover Bloks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover up those exposed connectors with PrintABlok Covers
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Does your PrintABlok creations have unsightly exposed connectors? Hide them with PrintABlok cover bloks. Covers of all shapes and sizes for all your printablok decorative needs.
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block out there.
If you are interested in getting a greater variety of blocks, including articulated blocks and decorative elements to build PrintABlok mechs, you can check premium sets here:
Note: If they don't print well standing on end, they'll print fine laying down.
Recommended Print Settings
While printabloks are design and will print will with any material and most common settings, for best results the following is recommended:
- Layer height 0.16 or lower
- Print connectors in PetG
And that's it. Enjoy.