1 / 2
HueForge Black and White Spider Man/DIY kid's art project
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge filament painting of Black and White Spider Man/DIY kid's art project
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 347
- Wydruki
- 1
- Wyświetlenia
- 3454
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
This can either be a black and white wall hanging or you can print it out in black and white and allow your child to color it in. You'd then have a piece of art they created to hang on the wall. Add some magnets and it can also be hung on the refrigerator.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mm
White for the rest.
