1 / 2
HueForge Black and White Superman/DIY kid's project
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge filament painting of Black and White Superman/DIY kid's project
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This can either be a black and white wall hanging or you can print it out in black and white and allow your child to color it in. You'd then have a piece of art they created to hang on the wall. Add some magnets and it can also be hung on the refrigerator.
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mm
White for the rest.
