1 / 1
Dragon Scale Pot Remix - water tight — zdjęcie 1

Dragon Scale Pot Remix - water tight

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

remixed to allow for strong and water-tight printing.

Ocena
5 / 5
Polubienia
25
Pobrania
315
Wydruki
2
Wyświetlenia
1046
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

V1 is a hollowed-out version of the original version uploaded by SassyDesign. The original is aimed at vase mode printing and I wanted a stronger and water tight version.

V2 is similar to V1 but it has an added chamfer to ensure a good seal between the base and the sides. 

The one in the photo was upscaled and printed with a +- 20cm diameter. It was printed without support. It was printer at 0.2 layer high, 3 walls and 5% infill. I decided to up my wall count to 3 to make sure it is watertight and I then reduced the infill to bring the printing time back down. Feel free to play around with your own settings, the design is solid so you'll likely be fine with 2 walls and the standard infill setting.

Tagi