Dragon Scale Pot Remix - water tight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remixed to allow for strong and water-tight printing.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 315
- Makes
- 2
- Views
- 1,046
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
V1 is a hollowed-out version of the original version uploaded by SassyDesign. The original is aimed at vase mode printing and I wanted a stronger and water tight version.
V2 is similar to V1 but it has an added chamfer to ensure a good seal between the base and the sides.
The one in the photo was upscaled and printed with a +- 20cm diameter. It was printed without support. It was printer at 0.2 layer high, 3 walls and 5% infill. I decided to up my wall count to 3 to make sure it is watertight and I then reduced the infill to bring the printing time back down. Feel free to play around with your own settings, the design is solid so you'll likely be fine with 2 walls and the standard infill setting.