SHIPS x NoClogger Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve designed to work with the SHIPS collection to keep your NoClogger within reach (and without bending)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a NoClogger and I love it. It's really convenient. But immediately I took issue with storing it and how relatively easy it would be to bend it. I designed this sleeve to work with the SHIPS system for easier storage while still having it within reach. Just print one or two hooks and attach to the back of the sleeve for a friction fit.
Introducing SHIPS, the SKÅDIS Hook-In-Place System. Although these theoretically could work with other types of peg boards, these have been tested to work with the SKÅDIS line of peg boards. They're super easy to print. Plus, all accessories will be designed so no glue is needed (just in case you change your mind and want to swap out an accessory or move it around the board)
V1 is intended as a friction-fit system, although I plan on designing a second version to work with smaller magnets for easier interchangeability.
If you're printing on its side, it's suggested to print with some minor supports along the channel where the hooks connect.