"UNlocked led gaming keyboard" replacement foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you happen to have this particular keyboard, and you happen to have broken off a foot, then you're in luck.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Step 1: Accidentally get one of your laptop feet broken off
Step 2: Take lots of detailed measurements
Step 3: Print a new one
Step 4: Profit
Open Source Model
Print Settings
It's a very small part, I recommend printing with a brim so nothing warps, It will be a little annoying to get the brim out from the flex slots, but I feel it is worth it for adhesion. Nothing a little needle file can't take care of.
I printed with a 0.4mm nozzle and 0.12mm layers
Use enough walls to prevent any infill for strength of the clip legs, they will need to flex to snap in. The positive lock in the open and closed position isn't as satisfying as the original injection molded feet, but they do a decent job of holding the foot open and closed.