1 / 3
Kasa HS300 Power Strip Mount remix center hole adjustment — zdjęcie 1
1 / 3

Kasa HS300 Power Strip Mount remix center hole adjustment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjusted the center hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes.

Ocena
0 / 5
Polubienia
16
Pobrania
202
Wydruki
2
Wyświetlenia
718
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 

3mf is setup for my Prusa Mini with 0.4mm nozzle at 0.25mm DRAFT layer height. 

kasa_HS300_cord_end.stl the original STL with some modifiers:

  • Organic supports 
  • 17mm cylinder as negative volume modifier at Object coordinates 0,0,0 (not World coordinates) to make hole in the center

kasa_HS300_end.stl is not modified and prints flat on bed. 

Tagi