1 / 5
Countertop Edge Paper Towel Holder - No Supports — zdjęcie 1
1 / 5

Countertop Edge Paper Towel Holder - No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paper towel holder that clips to the edge of a 1.5 in (38 mm) countertop.

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

I have a bar-height countertop behind my sink/counter where we often eat quick meals.  I wanted to be able to keep the paper towel roll secured at the edge of that bar-height counter where it could still be reached when working on the lower counter.  

I designed a two-piece paper towel holder that clips to the edge of the countertop.  The piece that holds the paper towels also has a retention piece to keep the towels from unrolling.  It can be oriented to either side or directly away from the clip.

I printed both pieces in white PETG for both strength and flexibility.  I used 0.20mm layer heights and 3 perimeters, and it worked fine.  The clip has to be printed on its side to avoid supports and get the layers in the strongest orientation.

NOTES

  • I noticed the retention feature was wobbling as it printed the half-ball end.  It still came out fine, but you could consider adding supports to make it stiffer
  • This was designed to be used on a 1.5in countertop with a fairly shallow lip.  If you have something different, the clip piece can be changed fairly easily to accommodate a different thickness or depth.  I have the lower part of the clip at a 5 degree angle relative to the upper to get squeeze on the edge of the counter.

Updated July 21, 2023:

  • Added the Jumbo size holder to accommodate thicker rolls

Tagi