1 / 5
Countertop Edge Paper Towel Holder - No Supports — image 1
1 / 5

Countertop Edge Paper Towel Holder - No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Paper towel holder that clips to the edge of a 1.5 in (38 mm) countertop.

Rating
0 / 5
Likes
1
Downloads
23
Makes
0
Views
293
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

I have a bar-height countertop behind my sink/counter where we often eat quick meals.  I wanted to be able to keep the paper towel roll secured at the edge of that bar-height counter where it could still be reached when working on the lower counter.  

I designed a two-piece paper towel holder that clips to the edge of the countertop.  The piece that holds the paper towels also has a retention piece to keep the towels from unrolling.  It can be oriented to either side or directly away from the clip.

I printed both pieces in white PETG for both strength and flexibility.  I used 0.20mm layer heights and 3 perimeters, and it worked fine.  The clip has to be printed on its side to avoid supports and get the layers in the strongest orientation.

NOTES

  • I noticed the retention feature was wobbling as it printed the half-ball end.  It still came out fine, but you could consider adding supports to make it stiffer
  • This was designed to be used on a 1.5in countertop with a fairly shallow lip.  If you have something different, the clip piece can be changed fairly easily to accommodate a different thickness or depth.  I have the lower part of the clip at a 5 degree angle relative to the upper to get squeeze on the edge of the counter.

Updated July 21, 2023:

  • Added the Jumbo size holder to accommodate thicker rolls

Tags