1 / 5
4010 Blower Bed Fans for 250mm Voron V2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you don't want the 5015s sticking out
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 942
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (1)Kolekcje (36)Powiązane
I designed these mounts because I didn't like how the 5015 fans stuck out from under the 250mm bed. There are two versions of this mount:
- Solid - Use this if you just want to bolt a 4010 blower to a 2020 extrusion
- Cut Out - Use this if you specifically want the 4010 blowers to tuck under your 250mm bed on a Voron V2
BOM (per mount)
- (2-4)x M2 self tapping screws 8mm - 10mm (I only use 2 screws but it supports up to 4)
- 2x Extrusion nut
- 2x 6mm-8mm screw (to match extrusion nut)