Spanner Hanger for Honeycomb Starge Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient and space efficient way to store your spanners/wrenches. Designed to fit into the Honeycomb Storage Wall.
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 1795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A convenient and space efficient way to store your 15° offset spanners/wrenches. Designed to fit into the Honeycomb Storage Wall by @RostaP , by using m4 or m5 inserts. Alternatively it can also be screw directly to the wall. They hang freely but are unable to be removed without swinging the tab forward, which stops them from falling off when rolling around on my tool trolley.
I built mine around a 7/8" aluminum tube but any tube or dowel can be used. Print parts as required, use the spacer on the end to stop the last spanner from falling off. You may need to adjust the spacer thickness to take up any left over room if you are going to use it on the Honeycomb Storage Wall as we need the hole spacing to be in multiples of 40.88mm.
Have also included my Fusion 360 file where you can change the parameters to suit whatever sized tube you are using or what spanners/wrenches you are using. Don't forget to allow for enough clearance in the bore to have the hangers spin freely. You may also need to lengthen the HangerLength parameter to spanners.wrenches larger than 19mm or ¾"
I have also included my 3 way straight m5 HSW insert.