Fork Gate Latch & Latch Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light duty fork gate latch and clamps.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 845
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Update July 16, 2025
Uploaded V4 Fork and V4 35mm diameter clamp for @SonaTop_2108106 who had a tight clearance situation.
Original Post-July 21, 2023
This is a light duty fork latch for use with gates that are used for pass through or access - not meant to contain livestock or large animals. I do have two latches on a gate for a pen that is used to exercise a four legged 50lb bulldozer and in the past two weeks the latches have held against several impacts at speed from her herding a hard plastic yard ball.
I have included clamps for ½" and ¾" pipe gates since those are what I have. The clamps will work with PVC/iron/galvanized pipe as well as RAC and IMC conduit. The IMC may need a light wrap to get the OD right.
The V1 clamp is pinned to the gate. The V2 clamp is a bolt on clamp that can be pinned to the gate or held place with set screws using heat set inserts from the inside. I used 5/16" bolts since that is what I had on hand.
Printer: Creality Ender 3 S1 Pro
Filament: Sunlu PETG
Layer Height: 0.2mm
Wall count: 6
Infill: 15%
Supports: None