Voron M4 BMG Pancake Motor Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of the well-known Voron M4 Mobius-Extruder, with bondtech BMG gear and Nema 14 Pancake Motor.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 146
- Wydruki
- 3
- Wyświetlenia
- 2110
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Voron M4 BMG Pancake Motor Extruder
I would like to present you my modification on the M4 Mobius extruder from Voron.
In this mod the drive has been replaced for a Bondtech BMG gear set with nema 14 pancake motor. Due to the adjustment to the design of the extruder, it has become a lot more compact and the extruder can easily be placed against the frame of the printer.
BOM:
Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support
All stl files are placed in the correct print position
Disclaimer:
This is a modification of this voron M4 extruder design.
I modified the existing design so that it can be used with a BMG gear kit and nema 14 pancake motor.
Here are some images of the original next to the modification.
On the left the original design / on the right my modification
