HueForge - Freddy vs Jason
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge print using the cover photo from the Freddy vs Jason movie.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Bambu Basic Black
PLA+ eSun Grey
PLA Bambu Matte Ash Grey
PLA+ eSun White
Swap Instructions:
Black until layer #5 at 0.48mm
Dark Gray until layer #10 at 0.88mm
Lighter Gray until layer #16 at 1.36mm
White for the rest.
Size is 150mm x 200mm
I have a friend that is a big Friday the 13th fan and horror movie fan in general so I printed this for him. I just used 2 shades of gray I had on hand with a black and white I had on hand. I didn't do step tests for any of them (although Bambu Matte Ash Grey has the same hex code as PolyTerra Fossill Grey and they're both considered matte, so I did put that in HueForge). I used the Sunlu PLA+ grey already in HueForge to represent the eSun PLA+ grey.