HueForge - Freddy vs Jason
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge print using the cover photo from the Freddy vs Jason movie.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 51
- Makes
- 0
- Views
- 385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Bambu Basic Black
PLA+ eSun Grey
PLA Bambu Matte Ash Grey
PLA+ eSun White
Swap Instructions:
Black until layer #5 at 0.48mm
Dark Gray until layer #10 at 0.88mm
Lighter Gray until layer #16 at 1.36mm
White for the rest.
Size is 150mm x 200mm
I have a friend that is a big Friday the 13th fan and horror movie fan in general so I printed this for him. I just used 2 shades of gray I had on hand with a black and white I had on hand. I didn't do step tests for any of them (although Bambu Matte Ash Grey has the same hex code as PolyTerra Fossill Grey and they're both considered matte, so I did put that in HueForge). I used the Sunlu PLA+ grey already in HueForge to represent the eSun PLA+ grey.