New Bambu Lab Build Plate QR codes (2D)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2D printable build plate QR codes for Bambu Lab printers. Gold textured PEI plate code included.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 3049
- Wydruki
- 2
- Wyświetlenia
- 7791
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
2D printable QR codes to stick on third-party or worn build plates to make Bambu Lab printers recognise them. The size of the code block itself should be 5×5 mm (not including the border and dotted line).
I just printed these on plain paper and then stuck that on the plate with temperature-resistant transparent tape.
Use an alignment guide to position the code on the plate, or use the official plate as reference.
I created these from scratch using Bambu's product photos as reference, since I couldn't find the new gold PEI sheet's code anywhere and existing files were not easily editable for me. Basically I made a 5×5mm block split into either 6×6 or 7×7 squares, which I then filled in according to the code.
Note: You need firmware from August 2023 or newer for the printer to recognise the gold PEI plate QR code.