New Bambu Lab Build Plate QR codes (2D)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2D printable build plate QR codes for Bambu Lab printers. Gold textured PEI plate code included.
- Rating
- 5 / 5
- Likes
- 98
- Downloads
- 3,049
- Makes
- 2
- Views
- 7,791
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
2D printable QR codes to stick on third-party or worn build plates to make Bambu Lab printers recognise them. The size of the code block itself should be 5×5 mm (not including the border and dotted line).
I just printed these on plain paper and then stuck that on the plate with temperature-resistant transparent tape.
Use an alignment guide to position the code on the plate, or use the official plate as reference.
I created these from scratch using Bambu's product photos as reference, since I couldn't find the new gold PEI sheet's code anywhere and existing files were not easily editable for me. Basically I made a 5×5mm block split into either 6×6 or 7×7 squares, which I then filled in according to the code.
Note: You need firmware from August 2023 or newer for the printer to recognise the gold PEI plate QR code.