V6 Nozzle Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Wusaweki's excellent hexagonal nozzle sheath to have a lid and labels.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 60
- Wydruki
- 2
- Wyświetlenia
- 559
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked Wusaweki's nozzle tray with the hexagonal springs but I wanted a box with a lid and labels so I remixed the design into a more traditional nozzle box.
The box has 10 slots each for 0.4mm, 0.6mm, and 0.8mm nozzles with half of them marked for hardened steel. I can never remember the E3D dot codes so I added that to the box as well.
Eight 3x6 magnets are needed for the lid.
There are 2 versions, one with a lip which can be a tight fit if your printer tolerances are not good and one that is a flush fit with a chamfered edge.