OneFinity 80mm spindle mount with hose clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA printed 80mm spindle holder for OneFinity with hose clamps for tightening. Remix from ThePrintKing aluminum one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Tried printing in PLA and using the aluminum one from Thingiverse by ThePrintKing (should be aluminum) but the flanges would crack over time so I replaced the flanges with hose clamps for holding the spindle and have got about 40 hours of use with no issues so far.
The bearings pushed into place with slight taps from a small rubber mallet. You will need to chase the threads with a tap M4x0.7 .
Used this ball screw nut https://a.co/d/4CYFLVs you can use the original one, I messed the original up when I disassembled it the first time.
Used these bearings https://a.co/d/2BZFaXN but I also assume the originals will work as well.