54 modeli
When I first got my suck it! dust boot I immediately set upon destroying it. It came free as part of a Onefinity sale so I didn't realize how expensive they were. After looking for a suitable replacement boot to buy I quickly noticed that…
probe holder for the Onefinity CNC PLA Print as is no supports needed Pictures shown are at 0.28 µm layer height 2 walls / 15% infill
Custom designed Suckit dust shoe (dust boot) arm(s), specifically for the Onefinity CNC, but should work for other manufacturers. This arm has been made stronger to support the larger model of dust shoe that uses a 4" hose found here:…
Replacement dust shoe for the Onefinity CNC Can be printed in one session on a small 3d printer (Ender 3) Will need additionally: Four 6x6mm rare earth magnets (please make sure to check the magnets directions before gluing them in place)…
Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print instructions Category: 3D Printer Accessories Summary Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print…
My CNC machine has a dust boot on it that attaches to arms on the gantry via a magnetically coupled brackets. I broke both the dust boot and one of the magnetic brackets when I inadvertently clipped a clamp. I was able to order a…
I remodeled and added little stoppers inside the groove because my dust boot kept slipping out.
I'm not the first one to do something like this, but I did come up with this design myself. It's pretty straightforward. Print one set of brackets for each side. Mount them as shown in the pictures using #8 sheet metal screws. Be careful…
A convenient storage solution for you Onefinity touch probe. You can also print inserts for it if you'd like (file included as well) The bottom of the holder has spots to glue in a magnet so you can store the probes magnet (make sure you…
A simple clip that works with the metal extrusion on the sides of the Y Axis to hold a 1mm sheet of plastic or cardboard. This acts as cover to protect your rails from direct debris falling on the Y rails.
Digital File to DIY 3D print (Cover ). 5 x STL model files included for different wing size (0mm, 30mm, 50mm, 60mm, 70mm). 1 x 3MF model file (prusa slicer) Installation: I used original masso cover screw. Each screw is long enough. Wire…
This is my take on the XYZ probe mount for the onefinity cnc mounted on a QCW frame. This uses two of the existing machine screws provided with the frame. Can be mounted on any of the four corners. I printed in PLA as this machine is…
Modification of original, mostly just extended the inner surface so it fit tighter, and also added the stepped larger covers for other open ends also. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
A little Back story. If you Follow Woby Design you have seen him wall mount his Onefinity CNC on a wall. But he Mounted it 90 degrees from what was recommended from Onefinity. IN doing so his X and Z were horizontal to the ground. So this…
If you are like me and destroyed one of the pockets on your Onefinity Easy ATC RapidChange automatic tool changer, you will need to 3d print these parts. The part with the 3 steel balls is not available from RapidChange so I had to model…
This STL is for the CNC GoPro mount and 100mm extension arm and will allow you to print it yourself. For hardware, we recommend this kit: https://amzn.to/3IO6a0l as our holder is designed to use an M5x20 bolt and M5 nut. If you want just…
This is an extension clip to attach the liquid coolant tubes to the onefinity CNC drag chain. It has a hole (badly positioned at the moment) to disconnect the drag chain. This clip can slide on top of the existing drag chain bracket and…
Overview : Gunk built up along the Y-Rail lead screws would accumulate inside the gantry and would need to be cleaned frequently. I made this wiper to greatly reduce the amount of dust and debris getting in. I can confirm this works with…
I needed to extend the boot out a bit for my 80mm spindle. To do that I had to lengthen this bracket and have it use the front and back both nuts on the boot rather than using the middle and one of the others. Thanks to motocoder for the…
this is a new model inspired by Greecher's ( https://www.thingiverse.com/thing:4878007)model for a light ring to mount on my Makita router for my onefinity cnc. Greechers model was good but didn't work for the headlight led's that I…
Homeing/Limit switch brackets for the Onefinity CNC, for use with when using a 3rd party controller which does not use stall homing. Designed to be used with proximity sensors on X/Y, and mechanical switch on Z axis. Print Settings Rafts:…
i have not tried it yet let me know how it goes
Slight remix of original, made it a bit beefier and symmetrical, as it first cnc'ed directly on the onefinity cnc itself, with a generous 1mm buffer for inner bores, that are then later milled to tolerance, adding in drill/tap and then…
Onefinity Chip Rail Guards @ MKE Gadgets #192 One at newest addition to my shop is my Onefinity CNC router. The best part of a new tool in the shop is accessorize it. And that’s what today’s video is about, as a router bit spins and…
I designed this mounting clamp for my 80mm spindle to be able easily take my laser on and off my CNC and allow for an independent mounting height relative to the spindle. It simply recreates the mounting points on a onefinity CNC z-axis…
I was not happy with the spring loaded display mount that came with my Onefinity Journeyman, so I made my own that mounts on top of the table. No supports are needed and it bolts directly to the spring loaded frame supplied by Onefinity.…
Onefinity Touch Probe Caddy @ MKE Gadgets #189 In this video, I redesign a touch, probe caddy. I got the original design offer Thingiverse, but I didn’t work for me. I redesign it to fit my needs and added a unique feature. Link to…
Onefinity CNC Router Four Hacks @ MKE Gadgets #243 In this video, I show four of my latest hacks for my Onefinitiy CNC router Spindle wrench holder Router wrench holder Touch probe caddy upgrade Pendant Holder Link to YouTube Link to…
designed to hold 8 -¼" bits and 3 - 1/8" bits. also holds the wireless remote, wrenches, 1" surfacing bit, and an extra collet for the makita router.
Tried printing in PLA and using the aluminum one from Thingiverse by ThePrintKing (should be aluminum) but the flanges would crack over time so I replaced the flanges with hose clamps for holding the spindle and have got about 40 hours of…
Here's another probe holder for the Onefinity Journeyman CNC. This one has been designed around the block and probe that came with the Journeyman model. No supports are needed if printed in the current orientation. Tested this print with…
A replacement insert foot for the Onefinity CNC Rolling/ Folding stand. The original inserts at the time of this part creation are square tube inserts that have been modified to fit inside the rounded corners of the production units.…
Simple and effective dust guard clips for the Y-rails on a Onefinity Journeyman CNC. This design is made to hold lightweight cardboard guards in a place, helping to protect the rails from dust, chips and debris during the operation. The…
Adapter to go between the Onefinity Suck It's 2.5" hose inlet to the outlet on the Hercules dust extractor vacuum. Print settings on BBL A1 0.4mm nozzle using BBL PLA Basic 4 walls 3 top and bottom layers 0.28mm layers No support needed
This is a replacement clip for the one that came with the qcw on my woodworker. It clips onto the 45mm framing tube at the front, for guiding the Y-axis cables. I designed it to sit nicely under the waste-board and I gave the cable…
I made this tool to be used on the wall mounted onefinity CNC to hold the probe block up on the bottom right corner of your material. Please use this at your own risk as you will be somewhat close to a Sharp router bit. If you know how…
Onefinity Laser and Indicator Mount @ MKE Gadgets #193 One at newest addition to my shop is my Onefinity CNC router. The best part of a new tool in the shop is accessorize it. Today’s project we’re making a laser mount, test indicator…
Onefinity Cable Cover @ MKE Gadgets #246 In this video, I make a cable cover for the end of the rails on my Onefinity CNC router This cover add a clean look and keeps the cable protected. Link to YourTube You can follow me: Printable…
Controller and tools tray for buildbotics onefinity
osVAC M32 adapter for the Onefinity Easy Dustboot.
Not a ton to say about it, add a little bit of a lift to your Onefinity CNC machine. Source Files are free and available in FreeCAD format on my website https://nerd-sniped.com/blog/onefinity-foot/
This is a simple design to store any accessories or bits you use on your Onefinity CNC with their QCW Mount. It has a lid to keep the inside chip free and spots available for a circle 10mm x 2mm magnet to keep it down but is not…
Remixed to use 10mm x 2.5mm magnets. With these magnets two parts will snap together perfectly and come apart with some force. The magnets stay in their holes even without superglue although they should be glued for actual use. I'm…
When doing epoxy pours on my QCW table I needed it to be level. Therefore I designed some feet (shoes?) that one pushes over the bottom of the QCW table legs in order to lengthen the leg to achieve a level table. For this to work you need…
This simple project will appeal to users of Onefinity machines that are also using the qcw. This is a riser block to be placed under each Y rail to raise the machine in order to remove the qcw frame. On a Onefinity Woodworker machine,…
Adapter to go between the Onefinity Suck It's 2.5" hose inlet to the outlet on the Hercules dust extractor vacuum. Print settings on BBL A1 0.4mm nozzle using BBL PLA Basic 4 walls 3 top and bottom layers 0.28mm layers No support needed
Controller and tools tray for buildbotics onefinity
Not a ton to say about it, add a little bit of a lift to your Onefinity CNC machine. Source Files are free and available in FreeCAD format on my website https://nerd-sniped.com/blog/onefinity-foot/
Simple and effective dust guard clips for the Y-rails on a Onefinity Journeyman CNC. This design is made to hold lightweight cardboard guards in a place, helping to protect the rails from dust, chips and debris during the operation. The…
Digital File to DIY 3D print (Bracket only ). 9 STL model files included for both 2.5" and 1 7/8" hose diameter. Designed for drag chain (internal 15mm x 40mm / external 20mm x 48mm) To be use with 'Drag Chain Cable Raceway for Onefinity…
Replacement Tool Setter Cap for Onefinity tool setter. Thread size is 8-32. Layer height: .15 (recommended) Works fine at .20 No Supports PLA, PETG, ABS, ASA all tested and work fine Printed version of the Tool Setter Cap are available on…
Digital File to DIY 3D print a Onefinity or Generic VFD Control Box. Support controlling accessories (like vacuum, colling pump, router) power outlet Start/Stop - Automatic from CNC Controler - or Automatic from HY Huanyang brand inverter…
Digital File to DIY 3D print (Bracket only ). 9 STL model files included for both 2.5" and 1 7/8" hose diameter. Designed for drag chain (internal 15mm x 40mm / external 20mm x 48mm) To be use with 'Drag Chain Cable Raceway for Onefinity…
