Himiway Tail/Brake light mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enables you to mount the rear/brake light that is usually mounted on the rack, on your seat post.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn’t want the fenders or rack on the Himiway zebra. The only place to mount the rear/brake light is on the rack. Till now. I used the original nuts and a couple of heavy duty zip ties to position it under my seat. You will need to undo some of the original zip ties and reroute them and reattach them but it works.
I used a 10mm M3 brass threaded insert on the inner t-piece insert. I then used 4x M3 washers and 2x M3 8mm hex bolts to enable the position to be adjusted.
Works for me. Hopefully it works for you too?
Should fit any 30.9mm seat post, so will likely work on other bikes, including other Himiway models.