KWA/KSC VZ61 (Part 37)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the rubber part on the Airsoft Model KWA/KSC VZ61/KZ.61 Skorpion Recoil Buffer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is a model of this part (Part 37) but specifically only the rubber piece that breaks/dries out frequently.
Credit for this model is hard to pin down, but this was shared on the HRC Discord by user:sindrathion - No one is taking credit for it but if someone does will update here.
Printing:
This will NOT work in PLA or PLA+. It has been tested with PAHT-CF and PA12-CF and worked to 1000 rnds with no signs of breaking. TPU testing is commencing but no conclusive evidence yet that it will work.
Use a .2mm Layer Height and 100% infill via walls. Slow your layer times down because layer adhesion is your friend here. You may need to file it a bit to get it to fit in, and using a small hammer tap it into place.