KWA/KSC VZ61 (Part 37)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of the rubber part on the Airsoft Model KWA/KSC VZ61/KZ.61 Skorpion Recoil Buffer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 66
- Makes
- 0
- Views
- 628
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is a model of this part (Part 37) but specifically only the rubber piece that breaks/dries out frequently.
Credit for this model is hard to pin down, but this was shared on the HRC Discord by user:sindrathion - No one is taking credit for it but if someone does will update here.
Printing:
This will NOT work in PLA or PLA+. It has been tested with PAHT-CF and PA12-CF and worked to 1000 rnds with no signs of breaking. TPU testing is commencing but no conclusive evidence yet that it will work.
Use a .2mm Layer Height and 100% infill via walls. Slow your layer times down because layer adhesion is your friend here. You may need to file it a bit to get it to fit in, and using a small hammer tap it into place.