Wansview Webcam Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount Wansview 1080p webcam…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Adapter to mount Wansview 1080p webcam (https://www.amazon.com/gp/product/B088D3VXC6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) on articulating camera mount developed by Sneaks. Adapter modeled with female link and socket joint.
Other adapters I have seen required the hardware provided by the webcam to secure to a mount, but I mangled that screw pretty quickly because of how soft it was. Designed this mount to work without that screw.
Camera is secured with 8 inch zip ties (4.6 mm wide x 1.2 mm thick). Anything smaller than that should also work assuming zip tie is long enough.
Update 3/2/21:
Thinner version of female link mount added. Achieves same function with less plastic and allows for neater print.
Print instructions
wansview-thin-mount-female-link print with webcam side face down, no supports needed.
[outdated] wansview-mount-female-link printed with webcam side face down and "Support on build plate only" enabled (PrusaSlicer). There is probably a better way to do it to get a nicer finish on webcam face of this piece, but this worked well enough for me.
wansview-mount-socket-joint printed with webcam side face up. I had this piece break free mid print once, so I use a 3mm brim to increase bed adhesion. Might not be necessary for others.