Rasperry Pi CM4 TV Stick Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-on housing with HDMI cover in two flavours.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This case for the Raspberry Pi Compute Moulde 4 TV Stick has to be slid over the entire module before the heat sink is attached.
The HDMI connection cover is available in two versions, with and without air ducts. The idea behind that the air ducts provide better cooling when the CM4 TV Stick is not connected to a monitor but beeing operated remotely. Will this actually have an impact on cooling performance? Certainly not. But the air ducts are hexagonal and at a 45° angle. So that's nice.
Post-processing with removal of the support structures is difficult because the walls are thin and the structures are filigree. So far, only prints with PETG have been made; PLA could simplify the process.