1 / 9
3S 3P lipo battery BMS holder (18650 battery - 3S3P) — zdjęcie 1
1 / 9

3S 3P lipo battery BMS holder (18650 battery - 3S3P)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650 3S3P)

Ocena
0 / 5
Polubienia
27
Pobrania
284
Wydruki
0
Wyświetlenia
2548
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650)

This is a clip in place holder for a 10 A BMS for a 3x3 3S3P lipo pack 

It can be used with one of the million 18650 battery spacer or holder you can find here on printables, wherever you put at least 3 batteries toghter. 

To firmly keep in place the BMS you can use glue or better o made holes for a cable tie

PRINT HINTS : print stand up (like you will put with the battery vertical- see last image)

0.2 mm layer height (also 0.3 should work)

20% infill

PRINT 3 or 5 lines of brim!

this is the BMS I use  : https://www.amazon.it/dp/B07T3B3F8X?psc=1&ref=ppx_yo2ov_dt_b_product_details (the rounded one), but for dimensions it quite common. In case you have different BMS just ask

Tagi