3S 3P lipo battery BMS holder (18650 battery - 3S3P)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650 3S3P)
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 284
- Makes
- 0
- Views
- 2,548
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650)
This is a clip in place holder for a 10 A BMS for a 3x3 3S3P lipo pack
It can be used with one of the million 18650 battery spacer or holder you can find here on printables, wherever you put at least 3 batteries toghter.
To firmly keep in place the BMS you can use glue or better o made holes for a cable tie
PRINT HINTS : print stand up (like you will put with the battery vertical- see last image)
0.2 mm layer height (also 0.3 should work)
20% infill
PRINT 3 or 5 lines of brim!
this is the BMS I use : https://www.amazon.it/dp/B07T3B3F8X?psc=1&ref=ppx_yo2ov_dt_b_product_details (the rounded one), but for dimensions it quite common. In case you have different BMS just ask